1、測試工位：3*2工位，分兩組獨立控制：彎曲半徑、速度、彎折角度、暫停、監測等

Test station: 3*2 station, divided into two groups of independent control;

bending radius, speed, bending angle, suspension, monitoring, etc；

2、試驗方式：垂直扭轉，上端扭轉、下端固定,吊掛張力砝碼；

Test methods: Vertical torsion，the upper end of the sample be torsion, the lower end fixed, with hanging tension weight；

3、試樣直徑：Ф3.0～Ф30mm；

Sample diameter: Ф3.0-Ф30mm；

4、承重：每個工位能承受重量為：7kg，含樣品+負重砝碼總重量

Maximum load-bearing capacity: each station can bear the maximum weight of 7 kg, including the total weight of sample + load-bearing weight.

5、試樣速度：0~60回/分鐘可調

Test speed: 0 ~ 60 Cycle/min (adjustable)

6、扭轉角度：±360°數字設定

Torsion angle: ±360° digital settings

7、夾具與扭轉點的距離:32-500mm可調節

Distance between gripper and torsion point:32-500mm adjustable

8、下端固定方式：精密直線導軌滑動式中心夾持治具

Lower end fixing method: precision linear guide sliding center clamping fixture

9、荷重砝碼： 5000g組合砝碼各6套

Weight: 6 sets of 5000g combined weights

10、控制方式：觸摸屏控制

Control: touch screen control;

11、計數位數：0-次

Counts the number of digits: 0- times

12、機臺材質：The machine material:

主體部分：采用45#優質鋼材與鋁材架構；

The main part: 45 # high-quality steel structure;

動力與傳動：采用進口原產工業同步帶與同步輪；

Transmission: imported industrial synchronous belt and synchronous wheel;

13、機臺尺寸：W1600*D700*H1700 (mm)

Dimension: W1600*D700*H1700 (mm)

14、電 源：220V,50 /60Hz 10A

Power supply: 220V, 50 / 60Hz 10A

15、重 量：500kg

Weight：500kg

16、安全防護：整體式防護機柜

Safety：Integral protective cabinet

17、外觀色調：如示意圖：深色：RAL 7024、淺色RAL 7035;

Equipment tone: such as sketch: dark color: RAL 7024, light color RAL 7035;