| 參考價 | 面議 |
TR-1 RK-1 KS-1 SH-1更新：2016-5-9 13:34:46點擊：產(chǎn)品品牌Decagon產(chǎn)品型號TR-1 RK-1 KS-1 SH-1產(chǎn)品描述...PDF下載 詢價 申請樣品
| SENSOR | TR-1 | RK-1 | KS-1 | SH-1 |
| MEASUREMENT | Read time- 5 Minutes | Read time- 10 Minutes | Read time- 60 Seconds | Read time- 2 Minutes |
| ACCURACY | (Conductivity): ± 10% from 0.2 - 4 W/(m· K) ±0.02 W/(m· K) from 0.01 - 0.2 W/(m· K) | (Conductivity): ±10% from 0.2 - 6 W/(m· K) ±0.02 W/(m· K) from 0.1 - 0.2 W/(m· K) | (Conductivity): ±5% from 0.2 - 2 W/(m· K) ±0.01 W/(m· K) from 0.02 - 0.2 W/(m· K) | (Conductivity) ± 10% from 0.2 - 2 W/(m· K) ±0.01 W/(m· K) from 0.02 - 0.2 W/(m· K) (Diffusivity) ±10% at conductivities above 0.1 W/(m· K) (Volumetric Specific Heat) ±10% at conductivities above 0.1 W/(m· K) |
| RANGES | K: 0.01 to 4 W/(m·K) R: 25 to 1000 °C·cm/W | K: 0.1 to 6 W/(m·K) R: 17 to 1000°C cm/W | K: 0.02 to 2 W/(m·K) R: 50 to 5000°C cm/W | K: 0.02 to 2.00 W /(m· K) R: 50 to 5000 °C·cm/W 0.1 to 1 mm2/s (diffusivity) 0.5 to 4 mJ/(m3K) (volumetric specific heat |
| ENVIRONMENT | –50 to 150°C | –50 to 150°C | –50 to 150°C | –50 to 150°C |
| DIMENSIONS | 10 cm length 2.4 mm diameter | 6 cm length 3.9 mm diameter | 6 cm length 1.27 mm diameter | 30 mm length 1.30 mm diameter 2 needles, 6 mm spacing |
| SAMPLE SIZE | Sample size is dependent on the thermal properties of the material being tested. In general a 2cm radius of sample material around the needle(s) is sufficient for samples with thermal conductivities around 0.5 W/mK. Samples with lower conductivity (i.e. insulation) can be tested with a smaller sample size. Samples with a higher conductivity (i.e. granite) will require a larger sample to avoid boundary effects. | |||
The large (10cm long, 2.4mm diameter) single needle TR-1 sensor measures thermal conductivity and thermal resistivity (part number 40352). The TR-1 was designed for us in soil, concrete and other granular or solid materials. If measuring cured concrete (or any other material that requires drilling…
The 6cm long, 3.9mm diameter single needle RK-1 sensor measures thermal conductivity and thermal resistivity (part number 40351). The RK-1 was designed for us in rock, concrete and other solid materials that require the drilling of a pilot hole. The RK-1 sensor should not be used in liquids. See…
The small 6cm long, 1.3mm diameter single needle KS-1 sensor (part number 40354) measures thermal conductivity and thermal resistivity of liquids and insulating materials. See the sensor comparisons tab on the KD2 Pro page for a side-by-side comparison of the sensors. Contact us…
The dual needle SH-1 sensor (3cm long, 1.3mm diameter, 6mm spacing) measures volumetric heat capacity, thermal diffusivity, thermal conductivity, and thermal resistivity (part number 40353). The SH-1 is compatible with most solid and granular materials. The SH-1 sensor should not be used in…
Need replacement drill bits for making pilot holes for your TR-1 sensor? Call (509-332-5599) or (thermal) and ask for part number 40052. The bit is hardened steel, 2.40mm diameter, 117mm…
Pilot pins for the TR-1 Sensor can be purchased in packs of five. Call (509-332-5599) or (thermal) and ask for part number…
Arctic Alumina thermal grease helps improve contact between the sensor needle and the material being measured. Call 509-332-5599 or thermal and ask for part number 40050 pricing and…
Need replacement roto hammer bits for making pilot holes for your RK-1 sensor? Call (509-332-5599) or (thermal). The bit is a 5/32" SDS-Plus Drill bit, 4" usable length (6" TL), 4-flute design for fast dust removal.
*您想獲取產(chǎn)品的資料：
個人信息：
